Skip to content
Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆
CLASSIC PARTSGARAGE0items in cart
1962-1964 Chevy Impala Trunk Lid Hinge, Pair, part number M8231
CLASSIC PARTS GARAGE · SCHEMATIC
M8231
M8231Golden StarRear

1962-1964 Chevy Impala Trunk Lid Hinge, Pair

1962–1964 Chevy Impala Trunk Lid Hinge Pair, designed to support proper deck-lid movement and alignment. Ideal for replacing worn, bent, or damaged original hinges while restoring smooth trunk opening and closing on your classic Impala.

In stock12 months

Not concours correct

Designed for 1962-1964 Chevy Impala trunk / deck-lid applications. Supplied as a matched LH and RH hinge pair. Matches the factory-style hinge location and operating geometry.

$230.00
1
003Specification

What it is

SHEET
003
SUBJECT
M8231
SCALE
1:1
REV
A

1962-1964 Chevy Impala Trunk Lid Hinge, Pair Product Description: Shop 1962-1964 Chevy Impala Trunk Lid Hinge, Pair when restoring smooth trunk operation on your classic Chevrolet. A worn used 1962-1964 Impala trunk hinge set can cause poor alignment, binding, or uneven deck-lid movement. Order 1962-1964 Chevy Impala trunk lid hinge pair online from Classic Parts Garage when you need a matched replacement for bent, loose, or damaged original hardware. This hinge pair is designed to support the trunk lid and help maintain proper movement through its opening and closing range. Replacing both hinges together is a practical choice when the original components show wear or no longer hold the deck lid in the correct position. Ideal for restoration, rear-body repair, and trunk alignment work, this set helps bring back dependable operation while preserving the classic appearance of your Impala. Features: Fits applicable 1962-1964 Chevrolet Impala models Supplied as a trunk lid hinge pair Replaces worn, bent, loose, or damaged original hinges Helps restore proper trunk lid alignment Supports smoother opening and closing Suitable for restoration and rear-body repair Factory-style replacement configuration Professional installation recommended Specifications: Vehicle: Chevrolet Impala Model Years: 1962-1964 Product Type: Trunk Lid Hinge Set Position: Rear Location: Trunk / Deck Lid Quantity: Pair / 2 Hinges Application: Replacement / Restoration Installation: Bolt-on with adjustment typically required Restore Proper Deck-Lid Movement Worn trunk hinges can lead to uneven gaps, difficult closing, or poor deck-lid alignment. Replacing the pair gives restorers a better foundation for accurate adjustment and smooth operation. This 1962-1964 Impala trunk hinge set is a practical replacement for classic Chevy restoration and rear-body repair projects.

Features
  • Fits applicable 1962-1964 Chevrolet Impala models
  • Supplied as a matched trunk lid hinge pair
  • Replaces worn, bent, loose, or damaged original hinges
  • Helps restore proper deck-lid alignment
  • Supports smoother trunk opening and closing
  • Suitable for restoration and rear-body repair
  • Factory-style replacement configuration
  • Ideal for correcting uneven trunk gaps or poor hinge movement
  • Professional installation and final adjustment recommended.
In the box
  • 1 × LH trunk lid hinge
  • 1 × RH trunk lid hinge

Shipping weight 5.26 lb

004Application register

Everything this fits

1 application · 0 verified

SHEET
004
SUBJECT
FITMENT
SCALE
1:1
REV
A
Chevrolet1
  • 1961–1964Impala
    All engines

Intended for applicable 1962-1964 Chevrolet Impala models. Verify your original trunk hinge layout and mounting points before ordering. Final deck-lid alignment may require adjustment after installation. Existing trunk springs, bolts, washers, and related hardware may need to be reused or purchased separately. Previous rear-body repairs or collision damage can affect hinge alignment. Support the trunk lid securely during removal and installation. Test trunk movement and panel gaps before final tightening. Professional installation is recommended.

005Counter questions

Asked about this part

What is the 1962-1964 Chevy Impala Trunk Lid Hinge, Pair?
This is a replacement trunk lid hinge set designed for 1962-1964 Chevrolet Impala applications. The set includes a pair of hinges for the trunk lid. The listed part number is TL13-63H.
What years does this trunk lid hinge fit?
The TL13-63H is listed for 1962, 1963, and 1964 Chevrolet Impala applications.
Is this a pair of trunk lid hinges?
Yes. The product is sold as a pair, providing the two hinges needed for the left and right sides of the trunk lid.
What is the part number?
The Golden Star vendor part number is TL13-63H. JEGS lists the corresponding part number as 189-TL13-63H.
Are both left and right hinges included?
Yes. The pair is intended to provide the driver-side and passenger-side trunk lid hinges as a complete set.
What body style does this hinge set fit?
Golden Star's listing identifies the application as sedan, while other supplier listings identify the hinges for 1962-1964 Impala 2-door applications. Because body-style coverage varies between listings, verify your exact body style before ordering.
Does it fit a 1962-1964 Chevy Impala hardtop?
Some replacement listings identify the same style of trunk hinges for sedan and hardtop applications. However, the TL13-63H Golden Star listing should be matched to your exact vehicle body style before purchase.
Does it fit a convertible?
Do not assume convertible compatibility. One Golden Star supplier listing specifically states that its 1962-1964 Impala hinge pair fits all 2-door models except convertible. Verify the body style before ordering.
Can these hinges fit other 1962-1964 Chevrolet models?
Some comparable hinge sets are listed for 1962-1964 Chevrolet Impala, Bel Air, and Biscayne applications. However, the exact TL13-63H application should be verified against your vehicle before ordering.
What material are the hinges made from?
C2C Fabrication lists the TL13-63H hinges as being made from steel.
Are these original GM hinges?
No. This is a replacement reproduction hinge set manufactured for classic Chevrolet restoration and repair applications. The Golden Star listing identifies it as a replacement for damaged original trunk hinges.
What problems can these hinges replace?
They can replace original trunk hinges that have become rusted, bent, dented, cracked, scratched, or otherwise damaged from age and use.
Are the hinges a direct-fit replacement?
JEGS lists the TL13-63H as a Direct Fit replacement for the specified application. Proper alignment should still be checked during installation.
Does the pair include the trunk lid?
No. The product is the hinge pair only. The trunk lid, trunk latch, striker, springs, weatherstrip, and other trunk components are separate unless specifically stated otherwise.
Are mounting bolts included?
The available listing identifies the product as a trunk lid hinge pair but does not specify mounting bolts as included. Verify the package contents before ordering if replacement hardware is also needed.
Are trunk lid springs included?
The listing does not identify trunk lid springs as part of the TL13-63H package. Do not assume springs or other hinge-related hardware are included.
Does this hinge set help correct trunk lid alignment?
Yes. Replacing worn or damaged hinges can restore the proper movement and positioning of the trunk lid. The hinges should be adjusted during installation so the lid aligns correctly with the surrounding body panels.
Is installation a bolt-on repair?
The hinges are designed as a replacement for the original trunk lid hinges, but installation may require removing the old hinges, installing the new pair, and carefully adjusting trunk-lid alignment. Professional installation is recommended when body alignment is difficult.
Is this suitable for a classic car restoration?
Yes. The TL13-63H is intended as a replacement component for 1962-1964 Chevrolet Impala restoration and repair projects.
Is the hinge sold individually?
No. The TL13-63H is sold as a pair, rather than as a single LH or RH hinge.
What is the manufacturing origin?
C2C Fabrication lists the manufacturing origin as Taiwan.
What is the shipping weight?
JEGS lists an approximate shipping weight of 5.26 lb for the TL13-63H pair.
What are the package dimensions?
JEGS lists approximate package dimensions of 44 inches deep × 12 inches high × 8 inches wide.
What should I verify before ordering?
Confirm the 1962, 1963, or 1964 Chevrolet Impala application, body style, trunk-lid configuration, and TL13-63H part number. Pay particular attention to convertible versus non-convertible applications.
What makes this the correct trunk lid hinge pair?
The key identifiers are the 1962-1964 Chevy Impala application, pair of trunk lid hinges, steel construction, and TL13-63H part number. Matching the body style and hinge mounting points with your original components helps confirm proper fitment.
007Same department

Also on this shelf

All Body & Sheet Metal