002Parts catalogue

The full shelf

81 parts on this sheet

SHEET

002

SUBJECT

CATALOGUE

SCALE

1:4

REV

1966-1970 Chevy Impala Sending Unit, 5/16" Line

restoration

M8110Golden Star

1966-1970 Chevy Impala Sending Unit, 5/16" Line

1966–1970 Chevy Impala fuel sending unit with a 5/16-inch line, designed to help restore accurate fuel-level readings and proper fuel pickup operation. Ideal for replacing a worn, corroded, or malfunctioning original sending unit during fuel-system restoration.

1965-1970 GM B Body Chevy Impala Lower Rear Control Arm Set (LH & RH) OE Style

OE-style lower rear control arm set for 1965–1970 GM B-Body Chevy Impala applications, including LH and RH arms. Designed to replace worn, bent, or damaged rear suspension components while helping restore proper axle location, suspension support, and factory-style geometry.

Suspension & SteeringLower

$395.00

1965-1970 Chevy Impala Belair Tubular Lower Control Arm Set (LH & RH) W/Shaft & Ball Joint

restoration

M0004Golden Star

1965-1970 Chevy Impala Belair Tubular Lower Control Arm Set (LH & RH) W/Shaft & Ball Joint

1965–1970 Chevy Impala and Bel Air models, including LH and RH arms with shafts and ball joints. Designed to replace worn factory components while improving front suspension support and providing a complete restoration-ready setup.

Suspension & SteeringLower

$250.00

1958-1964 Chevy Impala Belair Lower Control Arm Set (LH & RH) OE Style

restoration

M2097Golden Star

1958-1964 Chevy Impala Belair Lower Control Arm Set (LH & RH) OE Style

1958–1964 Chevy Impala/Belair Lower Control Arm Set, LH & RH, OE Style, designed to restore proper front suspension support and alignment. Ideal for replacing worn, bent, or damaged lower control arms while maintaining a factory-style suspension setup.

Suspension & SteeringLower

$265.00

restoration

M4416Golden Star

1963 Chevy Impala Front Bumper

1963 Chevy Impala Front Bumper, designed to restore the classic front-end appearance of your Chevrolet. Ideal for replacing a rusted, dented, bent, or damaged original bumper while giving your Impala a clean, restoration-ready finish.

Body & Sheet MetalFront

$449.00

1964 Chevy Impala Rear Bumper 1pc California Style

restoration

M1111Golden Star

1964 Chevy Impala Rear Bumper 1pc California Style

1964 Chevy Impala Rear Bumper, 1pc California Style, designed to restore the rear exterior with a clean, one-piece appearance. Ideal for replacing a dented, rusted, or damaged original bumper while giving your classic Impala a smooth restoration-ready finish.

Body & Sheet MetalRear

$349.00

1963-1964 Chevy Impala Trunk Weather Strip Gutter Set

restoration

M1670Golden Star

1963-1964 Chevy Impala Trunk Weather Strip Gutter Set

1963–1964 Chevy Impala Trunk Weather Strip Gutter Set, designed to restore the channel around the trunk opening where the weatherstrip mounts. Ideal for replacing rusted, damaged, or deteriorated gutter sections and helping support a proper trunk seal.

Body & Sheet MetalRear

$210.00

1965 Chevy Impala Trunk Lid With 4 Lamp Hole

restoration

M0921Golden Star

1965 Chevy Impala Trunk Lid With 4 Lamp Hole

1965 Chevy Impala Trunk Lid with 4 Lamp Hole, designed for rear deck restoration and proper lamp-area fitment. Ideal for replacing a rusted, dented, or damaged original lid while restoring the classic Impala’s rear appearance.

Body & Sheet MetalRear

$650.00

restoration

M6540Golden Star

1963 Chevy Impala Tail Panel, LH Hand

1963 Chevy Impala Tail Panel, LH, designed for the left-hand rear body section. Ideal for replacing rusted, dented, or damaged rear sheet metal while helping restore the classic Impala’s original-style rear body lines and appearance.

Body & Sheet MetalRear left

$70.00

1964 Chevy Impala Quarter Panel Complete RH

restoration

M1254Golden Star

1964 Chevy Impala Quarter Panel Complete RH

1964 Chevy Impala Complete Quarter Panel, RH, designed for the passenger-side rear body section. Ideal for replacing rusted, dented, or damaged sheet metal while restoring the classic Impala’s original-style body lines and rear exterior profile.

Body & Sheet MetalRight / passenger

$582.00

1964 Chevy Impala Quarter Panel Complete LH

restoration

M3000Golden Star

1964 Chevy Impala Quarter Panel Complete LH

1964 Chevy Impala Complete Quarter Panel, LH, designed for the driver-side rear body section. Ideal for replacing rusted, dented, or damaged sheet metal while restoring the classic Impala’s original-style body lines and rear exterior profile.

Body & Sheet MetalLeft / driver

$582.00

restoration

M3014Golden Star

1963-1964 Chevy Impala Hood Hinge, LH

1963–1964 Chevy Impala Hood Hinge, LH, designed for the driver-side hood mounting position. Ideal for replacing a worn, bent, or damaged hinge and helping restore proper hood alignment and smooth opening operation.

Body & Sheet MetalLeft / driver

$53.00

restoration

M1211Golden Star

1965-1970 Chevy Impala Trunk Floor, LH

1965–1970 Chevy Impala Trunk Floor, LH, designed for the driver-side rear trunk area. Ideal for replacing rusted, weakened, or damaged sheet metal while restoring the trunk floor structure and factory-style fit of your classic Impala.

Body & Sheet MetalLeft / driver

$85.00

restoration

M0972Golden Star

1967 Chevy Impala Fender RH

1967 Chevy Impala Fender, RH, designed for passenger-side body restoration and repair. Ideal for replacing a rusted, dented, or damaged original fender while helping restore the classic Impala’s factory-style exterior appearance.

Body & Sheet MetalFront right

$549.00

1962-1964 Chevy Impala Door Hinge, Upper

Classic Restoration

M0221Golden Star

1962-1964 Chevy Impala Door Hinge, Upper

1962–1964 Chevy Impala Upper Door Hinge — a quality replacement hinge designed for proper door alignment and smooth operation. Ideal for restoring your classic Impala’s original fit and function.

Body & Sheet MetalUpper

$125.00

1973-87 Chevy C10 5 Lug D/S Disc Rotor / Pad Front Wheel

5-Lug Front Disc Brake−12%

C5914Pirate Jack

1973-87 Chevy C10 5 Lug D/S Disc Rotor / Pad Front Wheel

1973–87 Chevy C10 5-Lug D/S Disc Rotor & Pad Front Wheel is a front disc brake component designed for compatible 1973–1987 Chevrolet C10 applications using a 5-lug setup.

1961-1964 Chevy Impala Sending Unit, 3/8" Line

1961–1964 Chevy Impala fuel sending unit with a 3/8-inch line, designed to help restore accurate fuel-level readings and proper fuel pickup operation. Ideal for replacing a worn, corroded, or malfunctioning original sender during fuel tank or fuel-system restoration.

1963 Chevy Impala Rear Bumper

1963 Chevy Impala Rear Bumper, designed to restore the classic rear-end appearance of your Chevrolet. Ideal for replacing a rusted, dented, bent, or damaged original bumper while giving your Impala a clean, restoration-ready finish.

Body & Sheet MetalRear

$449.00

1964 Chevy Impala Front Bumper 1pc California Style

restoration

M5190Golden Star

1964 Chevy Impala Front Bumper 1pc California Style

1964 Chevy Impala Front Bumper, 1pc California Style, designed to restore the classic front-end appearance with a smooth one-piece look. Ideal for replacing a rusted, dented, bent, or damaged original bumper on your Impala restoration.

Body & Sheet MetalFront

$449.00

1962-1964 Chevy Impala Trunk Lid Hinge, Pair

restoration

M8231Golden Star

1962-1964 Chevy Impala Trunk Lid Hinge, Pair

1962–1964 Chevy Impala Trunk Lid Hinge Pair, designed to support proper deck-lid movement and alignment. Ideal for replacing worn, bent, or damaged original hinges while restoring smooth trunk opening and closing on your classic Impala.

Body & Sheet MetalRear

$230.00

restoration

M7602Golden Star

1963 Chevy Impala Tail Panel, RH

1963 Chevy Impala Tail Panel, RH, designed for the right-hand rear body section. Ideal for replacing rusted, dented, or damaged rear sheet metal while helping restore the classic Impala’s original-style rear body lines and appearance.

Body & Sheet MetalRear right

$70.00

1969-1970 Chevy Impala Quarter Panel Skin, RH

restoration

M1143Golden Star

1969-1970 Chevy Impala Quarter Panel Skin, RH

1969–1970 Chevy Impala Quarter Panel Skin, RH, designed for the passenger-side rear body section. Ideal for repairing rusted, dented, or damaged outer sheet metal while restoring the classic Impala’s original-style body lines and exterior appearance.

Body & Sheet MetalRight / passenger

$395.00

1969-1970 Chevy Impala Quarter Panel Skin, LH

restoration

M0862Golden Star

1969-1970 Chevy Impala Quarter Panel Skin, LH

1969–1970 Chevy Impala Quarter Panel Skin, LH, designed for the driver-side rear body section. Ideal for repairing rusted, dented, or damaged outer sheet metal while restoring the classic Impala’s body lines and exterior appearance.

Body & Sheet MetalLeft / driver

$395.00

restoration

M0911Golden Star

1963-1964 Chevy Impala Hood Hinge, RH

1963–1964 Chevy Impala Hood Hinge, RH, designed for the passenger-side hood mounting position. Ideal for replacing a worn, bent, or damaged hinge while helping restore proper hood alignment and smooth opening operation.

Body & Sheet MetalRight / passenger

$53.00