Skip to content
Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆
CLASSIC PARTSGARAGE0items in cart
1963 Chevy Impala Tail Panel, LH Hand, part number M6540
CLASSIC PARTS GARAGE · SCHEMATIC
M6540
M6540Golden StarRear left

1963 Chevy Impala Tail Panel, LH Hand

1963 Chevy Impala Tail Panel, LH, designed for the left-hand rear body section. Ideal for replacing rusted, dented, or damaged rear sheet metal while helping restore the classic Impala’s original-style rear body lines and appearance.

In stock12 months

Not concours correct

Correct LH orientation for the left side of the rear body. Designed for 1963 Chevy Impala rear-sheet-metal restoration. Shaped to follow the factory-style tail-panel contours and surrounding body lines.

$70.00
1
003Specification

What it is

SHEET
003
SUBJECT
M6540
SCALE
1:1
REV
A

1963 Chevy Impala Tail Panel, LH Hand Product Description: Shop 1963 Chevy Impala Tail Panel, LH Hand when repairing the rear body of your classic Chevrolet. A rusted used 1963 Impala LH tail panel may hide corrosion, filler, or previous repairs. Order 1963 Chevy Impala Tail Panel LH online from Classic Parts Garage when you need a cleaner replacement for damaged or deteriorated rear sheet metal. This left-hand tail panel is designed for the rear section of the 1963 Impala. It provides a practical replacement when the original metal has been affected by rust, impact damage, or years of exposure. The panel helps restore the correct rear-body shape and gives restorers a solid foundation for alignment, body preparation, primer, and paint. Features: Designed for 1963 Chevrolet Impala LH / left-hand rear tail panel section Replaces rusted, dented, or damaged sheet metal Helps restore factory-style rear body contours Suitable for restoration and collision repair Provides a cleaner alternative to extensive patchwork Designed for test fitting and weld-in installation Professional installation recommended Specifications: Vehicle: Chevrolet Impala Model Year: 1963 Product Type: Tail Panel Position: Left Hand / LH Location: Rear Body Application: Replacement / Restoration Installation: Weld-in Finish: Requires body preparation, primer, and paint Restore the Rear Body Correctly Damage around the tail panel can affect surrounding sheet metal and rear-body alignment. Replacing the deteriorated LH section gives your restoration a cleaner foundation for finishing work. This 1963 Impala left-side tail panel is a practical choice for classic Chevy projects that need more than minor patch repair.

Features
  • Designed for 1963 Chevrolet Impala
  • LH / left-hand rear tail panel section
  • Replaces rusted, dented, or damaged rear sheet metal
  • Helps restore factory-style rear body contours
  • Suitable for restoration and collision repair
  • Provides a cleaner alternative to extensive patchwork
  • Designed for test fitting and weld-in installation
  • Requires final body preparation, primer, and paint
  • Professional installation recommended
In the box
  • 1 × 1963 Chevy Impala Tail Panel, LH

Shipping weight 2.00 lb

004Application register

Everything this fits

1 application · 0 verified

SHEET
004
SUBJECT
FITMENT
SCALE
1:1
REV
A
Chevrolet1
  • 1961–1964Impala
    All engines

Intended for applicable 1963 Chevrolet Impala models. Designed for the LH / left-hand rear tail-panel section. Confirm body style and surrounding rear-sheet-metal configuration before ordering. Trimming, drilling, welding, and final panel alignment may be required during installation. Existing rust, collision damage, or previous repairs can affect final fit. Adjacent trunk floor, quarter-panel, and rear-body areas should be inspected before installation. Test fit the panel with surrounding sheet metal before permanent welding. Professional body-shop installation is recommended.

005Counter questions

Asked about this part

What is the 1963 Chevy Impala Tail Panel, LH Hand?
This is a replacement left-hand tail panel designed for the 1963 Chevrolet Impala. The listed Golden Star part number is TP13-63L.
What year does this tail panel fit?
The TP13-63L is listed specifically for 1963 Chevrolet Impala applications.
Is this the left-hand or right-hand panel?
This is the LH (left-hand/driver-side) panel.
What is the part number?
The vendor/manufacturer part number is TP13-63L.
Is this a replacement body panel?
Yes. It is listed as a replacement tail panel for the 1963 Chevy Impala and is intended to replace damaged or deteriorated original sheet metal.
What kind of damage can this panel replace?
It can be used when the original panel has become rusted, dented, cracked, scratched, or otherwise damaged.
Is this a complete rear tail panel?
No. The TP13-63L is a left-hand section, not the complete rear tail-panel assembly. A separate 1963 Impala rear tail panel is also listed as a multi-piece/set-style component.
Is this the same as a tail lamp mounting panel?
No. The tail lamp mounting panel is a related but different component. For example, OER lists B1744/B1744W as the 1963 Impala LH tail lamp mounting panel. The TP13-63L is listed separately as a tail panel.
Is the panel a direct-fit replacement?
The TP13-63L listing identifies the part fitment as Direct Fit for the specified application.
Is this part sold individually?
Yes. The TP13-63L is listed as an individual replacement tail-panel component.
Can this panel fit a 1963 Chevy Bel Air or Biscayne?
Do not assume the TP13-63L fits every 1963 full-size Chevrolet. Other 1963 rear-body panels are separately listed for Impala, Bel Air, and Biscayne, so the exact part number and body configuration should be verified before ordering.
Does it fit a 1963 Impala station wagon?
Fitment should be verified carefully. Related 1963 LH tail-lamp mounting panels are specifically noted as not for station wagon models, so station-wagon compatibility should not be assumed for related rear-body components.
Does the panel include the tail lamps?
No. The tail panel is a body sheet-metal component. Tail lamps, lenses, bezels, and lamp hardware are separate components. OER lists those parts separately for the 1963 Impala.
Does it include the tail lamp mounting panel?
No. The LH tail lamp mounting panel is a separate replacement part, such as OER B1744/B1744W.
Is installation a bolt-on repair?
Because this is replacement body sheet metal, installation may require removing damaged metal, test-fitting, aligning, and welding the replacement panel. Proper body-panel alignment should be checked before final welding.
Is this suitable for a classic car restoration?
Yes. The panel is intended as a replacement for damaged original rear body sheet metal and can be used for 1963 Chevy Impala restoration and body repair.
What should I verify before ordering?
Confirm the 1963 Chevrolet Impala application, LH/driver-side position, TP13-63L part number, and the exact rear-body configuration. Also make sure you are ordering the tail panel rather than the separate tail-lamp mounting panel.
What makes this the correct panel?
The key identifiers are the 1963 Chevy Impala application, LH driver-side position, tail-panel design, and TP13-63L part number. These details should match your vehicle and the damaged panel being replaced.
What are the package dimensions?
The JEGS listing gives package dimensions of approximately 14 inches deep × 6 inches high × 13 inches wide for the TP13-63L.
007Same department

Also on this shelf

All Body & Sheet Metal