Skip to content
Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆
CLASSIC PARTSGARAGE0items in cart
1964-1969 Chevy Chevelle HEADLAMPS MOUNTING BUCKETS SET, part number CC6837
CLASSIC PARTS GARAGE · SCHEMATIC
CC6837
CC6837Golden StarFront

1964-1969 Chevy Chevelle HEADLAMPS MOUNTING BUCKETS SET

Headlamp mounting bucket set for compatible 1964–1969 Chevrolet Chevelle applications. Designed to support, position, and secure the front sealed-beam headlamps, these factory-style buckets help restore proper lamp alignment and mounting during restoration.

In stock12 Months

Not concours correct

This set is correct for compatible 1964–1969 Chevelle applications because the buckets are designed around the factory-style headlamp mounting location, sealed-beam positioning, retaining-ring interface, and adjustment geometry.

$130.00
1
003Specification

What it is

SHEET
003
SUBJECT
CC6837
SCALE
1:1
REV
A

1964–1969 Chevy Chevelle Headlamp Mounting Buckets Set Product Description Shop 1964–1969 Chevy Chevelle headlamp mounting buckets set for a clean front-end lighting restoration. Replacing a used Chevelle headlight bucket set can help correct rust, broken mounting points, loose lamps, or poor headlight alignment. Order Chevy Chevelle headlamp mounting buckets when rebuilding a compatible factory-style grille and headlight assembly. These buckets support and position the sealed-beam headlamps inside the front lighting assembly. Their formed construction helps maintain proper lamp location and provides the mounting foundation needed for aiming hardware, retaining rings, and surrounding trim. A practical choice for classic restorations, collision repair, and front-end refurbishment. Key Features Fits compatible 1964–1969 Chevrolet Chevelle applications Factory-style headlamp mounting buckets Designed to support and position sealed-beam headlights Helps restore correct headlight alignment Suitable for restoration and collision repair Formed metal construction Replaces rusted, bent, or damaged original buckets Works with compatible retaining rings and adjusters Supports proper lamp aiming Designed for original-style front lighting assemblies Product Specifications Specification Details Product Type Headlamp Mounting Bucket Set Vehicle Chevrolet Chevelle Model Years 1964–1969 Position Front / Headlight Assembly Function Headlamp Support & Alignment Construction Formed Metal Lamp Style Sealed Beam / Verify Application Quantity Set Mounting Style Factory-Style Application Restoration / Replacement Why Replace the Headlamp Buckets? Original buckets can rust, bend, crack around mounting points, or lose proper alignment after decades of use. Worn mounting hardware may also allow the lamps to move or aim incorrectly. Replacing the buckets helps restore a secure mounting surface and proper headlight positioning.

Features
  • Designed for compatible 1964–1969 Chevrolet Chevelle applications
  • Factory-style headlamp mounting bucket design
  • Supports and positions sealed-beam headlights
  • Helps restore proper headlamp alignment
  • Formed metal construction
  • Suitable for restoration and collision repair
  • Replaces rusted, bent, or damaged original buckets
  • Works with compatible headlamp retaining rings
  • Supports factory-style adjuster hardware
  • Helps maintain correct lamp spacing and orientation
  • Suitable for stock restorations and classic daily drivers
In the box
  • Headlamp mounting buckets as supplied in the set
  • Integrated mounting tabs and brackets
  • Adjuster mounting points

Shipping weight 7.00 lb

004Application register

Everything this fits

2 applications · 0 verified

SHEET
004
SUBJECT
FITMENT
SCALE
1:1
REV
A
Chevrolet2
  • 1968–1972Chevelle
    All engines
  • 1964–1967Chevelle
    All engines

Intended for compatible 1964–1969 Chevrolet Chevelle applications. Verify the exact model year because grille and headlamp layouts vary across this range. Confirm the number of headlamps and bucket positions required. Check sealed-beam lamp diameter and mounting style. Verify retaining-ring design and adjuster locations. Confirm the buckets match the correct inner and outer headlamp positions where applicable. Grille, bezel, and header-panel design can affect compatibility. Previous collision repairs or modified front sheet metal may affect alignment. Aftermarket LED sealed-beam replacements should match the original mounting dimensions. Do not assume adjusters, retaining rings, springs, screws, or lamps are included. Compare the original buckets and mounting pattern before installation.

005Counter questions

Asked about this part

What is this product?
It is a headlamp mounting bucket set for compatible 1964–1969 Chevrolet Chevelle applications.
What do headlamp mounting buckets do?
They support, position, and secure the headlamps inside the front lighting assembly.
What model years does this set fit?
It is intended for compatible 1964 through 1969 Chevy Chevelle models.
Is this a complete set?
It is sold as a bucket set, but exact quantity and included hardware should be verified.
What are the buckets made from?
They are typically formed from steel or similar metal.
Do all 1964–1969 Chevelles use the same headlamp arrangement?
No. Headlamp layouts and surrounding front-end components can vary by year.
Why should I verify the exact model year?
Grille design, bezels, bucket positions, and mounting details can differ.
Do inner and outer buckets differ?
They can, depending on application.
Do these work with sealed-beam headlights?
They are intended for compatible sealed-beam-style applications.
Can LED sealed-beam replacements be used?
Yes, if they match the original lamp dimensions and mounting design.
Do the buckets hold the lamps directly?
They support the lamps together with the retaining rings and adjustment hardware.
What do adjustment springs do?
They maintain tension while allowing the lamp to move during aiming.
Should anti-seize be used on adjuster threads?
A small amount may help where appropriate, but follow the hardware manufacturer’s recommendations.
Should the buckets be painted before installation?
They can be painted or coated if needed for corrosion protection.
Do these buckets affect beam aim?
Yes, because they provide the base for the aiming hardware.
Can I aim the headlights by eye?
A rough adjustment is possible, but proper aiming should follow an accepted headlamp alignment procedure.
Why is correct headlight aim important?
It improves nighttime visibility and reduces glare for other drivers.
Is it suitable for show cars?
Yes, if the finish and appearance match the desired restoration level.
Can custom headlights be used with these buckets?
Only if they match the bucket and retaining-ring dimensions.
Can damaged mounting tabs be repaired?
Sometimes, but replacement is usually better when structural damage is significant.
Should the original buckets be kept for comparison?
Yes, at least until installation is complete.
What should I compare between the old and new buckets?
Compare shape, mounting tabs, lamp opening, adjuster locations, spring points, and overall orientation.
Are these genuine GM parts?
Only if the exact listing identifies them as genuine GM.
Can aftermarket buckets work correctly?
Yes, if they match the original dimensions and mounting geometry.
What is the estimated product weight?
Approximately 3–6 lb depending on quantity, construction, and included hardware.
What shipping weight should I use?
A practical estimated packaged weight is about 7 lb.
What should I verify before ordering?
Confirm the 1964–1969 Chevrolet Chevelle model year, headlamp count, inner and outer bucket positions, sealed-beam dimensions, retaining-ring type, adjuster locations, grille configuration, mounting points, and included hardware before purchase.
007Same department

Also on this shelf

All Ignition & Electrical