Skip to content
Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆
CLASSIC PARTSGARAGE0items in cart
1966-1977 Ford Bronco Fender New Quality LH, part number FB9763
CLASSIC PARTS GARAGE · SCHEMATIC
FB9763
FB9763Golden StarLeft / driver

1966-1977 Ford Bronco Fender New Quality LH

New-quality replacement LH front fender for 1966–1977 Ford Bronco models. Designed for the driver side, this reproduction-style body panel helps restore the original front body shape after rust, dents, collision damage, or previous poor repairs.

In stock12 Months

Not concours correct

This fender is correct for restoration work because it is shaped specifically for the LH driver side of 1966–1977 first-generation Ford Broncos and follows the early Bronco’s front wheel opening, hood edge and door interface.

$306.00
1
003Specification

What it is

SHEET
003
SUBJECT
FB9763
SCALE
1:1
REV
A

1966–1977 Ford Bronco Fender New Quality LH Product Description Shop 1966–1977 Ford Bronco LH front fender for classic restoration, rust repair, or collision work. Replacing a used Ford Bronco driver-side fender can provide a cleaner foundation when the original panel is dented, corroded, or heavily repaired. Order 1966–1977 Bronco LH fender for a factory-style body restoration or custom build. This new-quality replacement panel is formed for the left-hand front side of first-generation Ford Bronco models. Its shape follows the classic wheel opening, hood edge, door-side contour, and front grille area to help restore the original exterior profile. The panel can be prepared, primed, painted, and adjusted during installation for proper body gaps. Key Features Fits compatible 1966–1977 Ford Bronco models LH / driver-side front fender New replacement sheet-metal panel Factory-style exterior profile Correct early Bronco wheel-opening shape Ideal for rust and collision repair Suitable for stock restorations and custom builds Can be primed and painted to match the vehicle Helps replace heavily damaged original bodywork Product Specifications Specification Details Product Type Front Fender Vehicle Ford Bronco Model Years 1966–1977 Generation First Generation / Early Bronco Position Front Left Side LH / Driver Side Material Formed Sheet Metal Finish Requires Preparation / Paint Installation Bolt-On Body Panel with Adjustment Use Restoration, Rust Repair, Collision Repair Why Choose a Full Replacement Fender? A full replacement panel is a practical option when the original fender has widespread rust, deep dents, torn mounting points, or excessive body filler. Starting with fresh sheet metal can reduce repair work and help achieve cleaner panel alignment before paint.

Features
  • Fits compatible 1966–1977 Ford Bronco models
  • LH / left-hand / driver-side front fender
  • New replacement body panel
  • Factory-style overall shape and wheel-opening profile
  • Suitable for rust repair and collision restoration
  • Formed sheet-metal construction
  • Designed to align with the hood, grille, door, inner fender, and rocker area
  • Useful for full restorations and custom Bronco builds
  • Provides a cleaner starting point than repairing heavily damaged original sheet metal
  • Can be prepared, primed, painted, and refinished to match the vehicle
In the box
  • 1 × LH / driver-side front fender

Shipping weight 30.00 lb

004Application register

Everything this fits

1 application · 0 verified

SHEET
004
SUBJECT
FITMENT
SCALE
1:1
REV
A
Ford1
  • 1966–1977Bronco
    All engines

Designed for the left-hand / driver side only. Intended for compatible 1966–1977 first-generation Ford Bronco models. Verify the vehicle is an early Bronco and not a later 1978-up full-size Bronco. Reproduction sheet metal may require minor adjustment, slotting, shimming, or edge alignment during installation. Test-fit the fender with the hood, grille, door, rocker panel, inner fender, and front support before painting. Body gaps can vary on restored, previously repaired, or modified Broncos. Existing collision damage to the core support, cowl, door pillar, or inner fender can affect alignment. Fender flare modifications or previously cut wheel openings may affect fitment. Side-marker, emblem, antenna, or trim-hole configuration may vary by model year and trim. Confirm whether holes must be drilled or modified for the specific Bronco equipment. Professional body fitting, corrosion protection, seam sealing, priming, and refinishing are recommended. Large sheet-metal parts should be inspected for freight damage before bodywork begins.

005Counter questions

Asked about this part

What is this product?
It is a new replacement left-hand front fender for compatible 1966–1977 Ford Bronco models.
Which side does LH refer to?
LH means left-hand, which is the driver side on U.S.-market Broncos.
Does this fit 1966–1977 Ford Bronco models?
Yes. It is intended for compatible first-generation Ford Bronco applications from 1966 through 1977.
Is this an inner fender?
No. This listing is for the outer front fender panel.
Is this an original Ford OEM fender?
Unless specifically stated otherwise by the supplier, it should be treated as a reproduction or aftermarket replacement panel.
Is this suitable for restoration work?
Yes. It is a good option for classic Bronco restoration, rust repair, and collision repair.
Does the panel follow the original Bronco body contour?
Yes. It is designed around the classic early Bronco front-body profile.
Is the fender made from steel?
This type of replacement fender is typically made from formed sheet metal.
Will reproduction sheet metal fit perfectly out of the box?
Not always. Minor fitting and adjustment are common with classic-vehicle replacement panels.
Should I test-fit the fender before painting?
Yes. Always test-fit and align the panel before final paintwork.
What surrounding parts should I check during installation?
Check alignment with the hood, grille, door, rocker area, inner fender, and front support.
Can a damaged core support affect fender fitment?
Yes. Bent or previously repaired front structure can make proper alignment more difficult.
Should the hood and door be installed during test fitting?
Yes. Their position helps establish proper panel gaps.
How should I check the wheel-opening alignment?
Compare the opening with the original body line, tire position, rocker, and surrounding panels.
Can body mounts affect fender alignment?
Yes. Worn or uneven body mounts can change body-panel relationships.
Can frame damage affect fender fitment?
Yes. Structural damage can make proper panel alignment difficult.
Is this panel correct for both stock and restored Broncos?
Yes, as long as the surrounding body and mounting points match the original 1966–1977 Bronco layout.
Is this panel interchangeable left to right?
No. The LH fender is shaped specifically for the driver side.
What is the estimated bare panel weight?
Approximately 18–25 lb, depending on the manufacturer and panel construction.
What shipping weight should I use for the listing?
30 lb (13.6 kg) is a practical estimated packaged listing weight unless the supplier provides an exact figure.
Why is shipping weight higher than the panel weight?
Large sheet-metal panels need protective cartons, reinforcement, and packing material.
Should I inspect the fender when it arrives?
Yes. Check for dents, bent edges, scratches, and freight damage before beginning bodywork.
What should I verify before ordering?
Confirm 1966–1977 Ford Bronco fitment, LH driver-side position, early Bronco body style, wheel-opening profile, trim and marker-light configuration, and surrounding body condition before purchase.
007Same department

Also on this shelf

All Body & Sheet Metal