Skip to content
Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆
CLASSIC PARTSGARAGE0items in cart
1967-69 Mustang 4 wheel Power Disc Brake Kit-X drilled rotor- Manaul Trans-Black, part number FM8764
CLASSIC PARTS GARAGE · SCHEMATIC
FM8764
FM8764Force 10 BrakesFront

1967-69 Mustang 4 wheel Power Disc Brake Kit-X drilled rotor- Manaul Trans-Black

Complete 4-wheel power disc brake conversion kit for compatible 1967–1969 Ford Mustang applications with a manual transmission. Designed to replace outdated drum or mixed brake setups with front and rear disc brakes, power assist, cross-drilled rotors, and black-finish components.

In stock12 Months

Not concours correct

This kit is correct for compatible 1967–1969 Mustang performance and restoration builds because it is designed as a complete four-wheel brake conversion, addressing both front and rear wheel ends rather than upgrading only one axle.

$1,800.00
1
003Specification

What it is

SHEET
003
SUBJECT
FM8764
SCALE
1:1
REV
A

1967–1969 Mustang 4-Wheel Power Disc Brake Kit – Cross-Drilled Rotors – Manual Transmission – Black Product Description Shop 1967–1969 Mustang 4 wheel power disc brake kit for a complete front and rear braking upgrade. Replacing a used Mustang drum or outdated disc brake system can improve braking consistency, pedal response, and heat control. Order Mustang power disc brake conversion kit with cross-drilled rotors for a cleaner performance setup designed around compatible manual-transmission cars. This kit is intended for 1967–1969 Ford Mustang applications and combines front and rear disc brake components with power-assist hardware. Cross-drilled rotors add a performance-inspired appearance, while the black finish provides a clean, understated look behind the wheels. Key Features Fits compatible 1967–1969 Ford Mustang applications Complete 4-wheel disc brake conversion Power brake assist configuration Designed for compatible manual-transmission cars Cross-drilled rotor design Black-finish brake components Front and rear disc brake upgrade Improved heat management compared with drum brakes Better service access and brake inspection Suitable for restoration, restomod, and performance builds Product Specifications Specification Details Product Type 4-Wheel Power Disc Brake Kit Vehicle Ford Mustang Model Years 1967–1969 Transmission Manual, Verify Exact Application Brake Position Front & Rear Rotor Style Cross-Drilled Finish Black Brake Assist Power Front Calipers Verify Kit Contents Rear Calipers Verify Kit Contents Master Cylinder / Booster Verify Proportioning Valve Verify Parking Brake Components Verify Wheel Size Requirement Verify Why Choose a 4-Wheel Disc Brake Kit? A full four-wheel disc setup replaces aging drum components with a more serviceable brake system that can provide better heat dissipation, more consistent stopping performance, and easier maintenance. Power assist can also reduce pedal effort when the system is correctly matched.

Features
  • Fits compatible 1967–1969 Ford Mustang applications
  • Complete front and rear disc brake conversion
  • Power brake assist configuration
  • Designed for compatible manual-transmission cars
  • Cross-drilled front and rear rotors
  • Black-finish calipers / components where supplied
  • Helps improve braking consistency
  • Better heat dissipation than traditional drum brakes
  • Reduced pedal effort with properly matched power assist
  • Suitable for restoration, restomod, street, and performance builds
  • Easier pad and rotor inspection than drum-brake system
In the box
  • 2 × Front disc brake rotors
  • 2 × Rear disc brake rotors
  • Front brake calipers
  • Rear brake calipers
  • Front and rear caliper mounting brackets
  • Brake pads
  • Power brake booster
  • Master cylinder
  • Proportioning / distribution components where supplied
  • Flexible brake hoses
  • Rotor / hub hardware where applicable
  • Rear parking-brake components where supplied
  • Mounting hardware
  • Installation instructions where included

Shipping weight 150.00 lb

004Application register

Everything this fits

2 applications · 0 verified

SHEET
004
SUBJECT
FITMENT
SCALE
1:1
REV
A
Ford2
  • 1969–1973Mustang
    All engines
  • 1967–1968Mustang
    All engines

Intended for compatible 1967–1969 Ford Mustang applications. Confirm manual-transmission compatibility before ordering. Verify booster clearance around clutch linkage and firewall components. Check front spindle requirements and whether original or conversion spindles are needed. Confirm rear axle housing and flange pattern. Verify axle offset and rear caliper bracket compatibility. Check wheel diameter and backspacing for front and rear caliper clearance. Some original 14-inch wheels may not clear larger disc brake packages. Confirm rotor diameter and thickness. Verify whether parking-brake cables are included or sold separately. Check master-cylinder bore and booster size against the complete brake setup. Confirm proportioning-valve configuration. Modified steering, suspension, headers, or clutch linkage may affect booster and brake-line clearance. Professional bleeding and brake-balance verification are recommended after installation.

005Counter questions

Asked about this part

What is this product?
It is a complete 4-wheel power disc brake conversion kit for compatible 1967–1969 Ford Mustang applications with a manual transmission.
What years does it fit?
It is intended for 1967, 1968, and 1969 Ford Mustang applications, subject to the correct suspension, axle, wheel, and transmission configuration.
Is this a front-only brake kit?
No. It is designed as a front and rear 4-wheel disc brake conversion.
Does the kit include power assist?
It is described as a power disc brake kit and typically includes booster-related components, but verify the exact package contents.
Why does manual-transmission fitment matter?
Booster clearance, pedal arrangement, clutch linkage, and firewall configuration can differ from automatic-transmission applications.
Can I use this kit on an automatic-transmission Mustang?
Do not assume compatibility unless the supplier specifically lists the kit for automatic-transmission cars.
Are the rotors cross-drilled?
Yes, the kit is described with cross-drilled rotors.
Are the components black?
The kit is described as having a black finish on applicable brake components.
What does “4-wheel power disc” mean?
It means disc brakes are used at both the front and rear, with power-assisted braking.
Does this replace factory drum brakes?
It can replace drum-brake setups on compatible applications.
Can it replace a mixed front-disc/rear-drum setup?
Yes, if the kit is designed for the vehicle's existing configuration.
Does it improve braking performance?
It can improve braking consistency, heat control, pedal assist, and serviceability when the system is properly matched.
Will it automatically shorten stopping distance?
Not necessarily. Stopping distance also depends on tires, vehicle weight, road conditions, hydraulic setup, and driver input.
Are parking-brake components included?
Some rear-disc kits include them, but exact contents should be verified.
Does the parking brake still work after conversion?
It can, if the kit includes or supports a compatible parking-brake arrangement.
What should I verify before ordering?
onfirm the 1967–1969 Ford Mustang model year, manual-transmission configuration, clutch linkage and booster clearance, front spindle type, rear axle flange and offset, wheel diameter and backspacing, rotor dimensions, caliper clearance, master-cylinder bore, booster size, proportioning valve, parking-brake arrangement, brake-line fittings, and exact kit contents before purchase.
007Same department

Also on this shelf

All Brakes