Skip to content
Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆
CLASSIC PARTSGARAGE0items in cart
1967 Chevy Impala Fender RH, part number M0972
CLASSIC PARTS GARAGE · SCHEMATIC
M0972
M0972Golden StarFront right

1967 Chevy Impala Fender RH

1967 Chevy Impala Fender, RH, designed for passenger-side body restoration and repair. Ideal for replacing a rusted, dented, or damaged original fender while helping restore the classic Impala’s factory-style exterior appearance.

In stock12 months

Not concours correct

Correct right-hand orientation for the passenger-side front of a 1967 Impala. Shaped to follow the original-style Impala fender profile and body lines. Designed as a restoration replacement for rusted or damaged factory sheet metal.

$549.00
1
003Specification

What it is

SHEET
003
SUBJECT
M0972
SCALE
1:1
REV
A

1967 Chevy Impala Fender RH Product Description: Shop 1967 Chevy Impala Fender RH for your classic Chevrolet restoration or body repair project. Skip the extra work often required with a rusted used 1967 Impala passenger-side fender. Order 1967 Chevy Impala Fender RH online from Classic Parts Garage when you need a cleaner replacement for dented, corroded, or damaged front sheet metal. This right-hand front fender gives restorers a solid starting point for bringing back the clean exterior profile of a 1967 Impala. It is ideal when the original panel has suffered from rust, collision damage, previous repairs, or years of deterioration. Use it for a full restoration, body-shop repair, or individual panel replacement. Proper test fitting and final surface preparation are recommended before paint. Features: Designed for 1967 Chevrolet Impala RH / passenger-side front fender Replaces rusted, dented, or damaged original sheet metal Factory-style exterior profile Suitable for restoration and collision repair Ready for test fitting, preparation, primer, and paint Helps reduce extensive patch-panel repair work Specifications: Vehicle: Chevrolet Impala Model Year: 1967 Product Type: Front Fender Position: Right Hand / RH Side: Passenger Side Application: Replacement / Restoration Finish: Requires final preparation and paint Installation: Professional fitting recommended Restore the Passenger-Side Body Line A worn or damaged front fender can disrupt the distinctive body lines of a classic Impala. Replacing the panel gives your project a cleaner foundation for proper alignment, finishing, and paint. This 1967 Impala RH fender is a practical choice for restorers looking to complete the passenger side of their classic Chevrolet.

Features
  • Fits 1967 Chevrolet Impala
  • RH / passenger-side front fender
  • Replacement for rusted, dented, or damaged original sheet metal
  • Factory-style body contour for restoration work
  • Suitable for complete restorations or individual body repairs
  • Ready for test fitting, body preparation, primer, and paint
  • Helps reduce extensive patching and metal repair
  • Professional installation recommended
In the box
  • 1 × 1967 Chevy Impala Fender, RH
  • Mounting hardware, trim, emblems, brackets, and accessories are not included unless otherwise stated

Shipping weight 31.00 lb

004Application register

Everything this fits

1 application · 0 verified

SHEET
004
SUBJECT
FITMENT
SCALE
1:1
REV
A
Chevrolet1
  • 1965–1970Impala
    All engines

Intended for 1967 Chevrolet Impala applications. Designed for the RH / passenger-side front position. Confirm body style and original fender configuration before ordering. Minor drilling, trimming, alignment, or bodywork may be required during installation. Existing trim, emblems, brackets, and mounting hardware may need to be reused. Previous collision repairs or body modifications can affect final fit. Test fit the fender before primer and paint.

005Counter questions

Asked about this part

Does this fender fit a 1967 Chevy Impala?
Yes. This replacement front fender is listed for the 1967 Chevrolet Impala and other compatible 1967 full-size Chevrolet applications.
Is this the RH or passenger-side fender?
This is the RH (right-hand) passenger-side front fender. It installs on the right side of the vehicle.
What is the Golden Star part number?
The Golden Star part number is FE13-67R for the 1967 Impala RH fender.
Does it fit other 1967 Chevrolet models?
Yes. The corresponding reproduction fender is listed for the 1967 Chevrolet Impala, Caprice, Bel Air, and Biscayne.
Is this a front fender?
Yes. It is a front exterior fender designed to replace the original passenger-side body panel.
Is this an original GM fender?
No. This is a reproduction replacement fender, not an original GM factory panel. The OER version is manufactured from stamped steel to replicate the original GM fender.
What material is the fender made from?
The documented OER reproduction is made from high-grade stamped steel.
Does the fender have a protective coating?
The OER version features a black EDP/E-coat designed to provide corrosion protection and is supplied ready for preparation, priming, and painting.
Does it come painted in the original Impala color?
No. The protective coating is not the vehicle's finished exterior paint. The fender should be properly prepared and painted to match the vehicle.
Does the fender include mounting hardware?
Do not assume mounting hardware is included. Bolts, clips, brackets, and other installation hardware should be confirmed separately unless specifically listed with the product.
Does it include fender trim or emblems?
No. Fender moldings, emblems, badges, and other exterior trim should not be assumed to be included unless stated in the listing.
Can this replace a rusty or damaged original fender?
Yes. Replacement fenders are intended for vehicles with damaged, rusted, dented, or otherwise unusable original sheet metal.
Is this suitable for a classic Impala restoration?
Yes. A replacement front fender can be used for a 1967 Impala restoration, body repair, or sheet-metal replacement project.
What should I verify before ordering?
Confirm the 1967 model year, Chevrolet Impala application, RH/passenger-side position, front-fender location, and body configuration. Compare the replacement with your existing fender before installation.
Will the fender require adjustment during installation?
Possibly. Replacement body panels may require adjustment to achieve correct door, hood, grille, and body-panel gaps. Professional body-panel installation is recommended for restoration work.
What is the shipping weight?
The documented OER RH fender has a listed shipping weight of approximately 35 lb 13 oz, with dimensions of 69 × 28 × 15 inches and truck shipping.
What makes this fender correct for a 1967 Impala?
The key fitment details are 1967 Chevrolet Impala, front fender, RH/passenger side, with Golden Star's corresponding part number FE13-67R.
007Same department

Also on this shelf

All Body & Sheet Metal