Skip to content
Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆
CLASSIC PARTSGARAGE0items in cart
1987-1991 Ford Bronco XLT 4pc Chrome Fender Side Emblems Badges LH & RH, part number FB9853
CLASSIC PARTS GARAGE · SCHEMATIC
FB9853
FB9853Dennis CarpenterFront

1987-1991 Ford Bronco XLT 4pc Chrome Fender Side Emblems Badges LH & RH

Four-piece chrome fender-side emblem and badge set for 1987–1991 Ford Bronco XLT models. Designed for both the LH driver side and RH passenger side, this set helps restore the factory-style Bronco XLT exterior appearance when original badges are faded, missing, damaged, or heavily worn.

In stock12 Months

Not concours correct

This set is correct for restoring the exterior identity of a compatible 1987–1991 Ford Bronco XLT because it provides the matching Bronco and XLT side emblems for both the LH and RH fenders.

$115.00
1
003Specification

What it is

SHEET
003
SUBJECT
FB9853
SCALE
1:1
REV
A

1987–1991 Ford Bronco XLT 4pc Chrome Fender Side Emblems Badges LH & RH Product Description Shop 1987–1991 Ford Bronco XLT 4pc chrome fender emblem set for restoring the factory-style appearance on both sides of your Bronco. Replacing a used Bronco XLT emblem set that is faded, scratched, missing, or mismatched can quickly improve the exterior finish. Order 1987–1991 Ford Bronco XLT side badges LH and RH for restoration, repaint projects, or a clean factory-inspired exterior refresh. This four-piece set provides matching Bronco and XLT emblems for the driver and passenger sides. The bright chrome finish works well with classic XLT exterior trim and helps keep the badging consistent across both fenders. Key Features Fits compatible 1987–1991 Ford Bronco XLT models Complete 4-piece side emblem set Includes LH and RH applications Chrome-finish exterior styling Bronco and XLT badge combination Ideal for restoration and exterior refresh Replaces faded, damaged, or missing emblems Helps maintain matching trim on both sides Suitable for stock and custom Bronco builds Product Specifications Specification Details Product Type Fender Emblem / Badge Set Vehicle Ford Bronco Model Years 1987–1991 Trim XLT Pieces 4 Sides LH & RH Finish Chrome Position Exterior Fender / Side Body Mounting Verify Stud / Clip / Adhesive Style Use Restoration / Appearance Upgrade Why Replace the Complete Emblem Set? Using a complete four-piece set avoids mixing old and new badges with different finishes, wear, or dimensions. It gives both sides of the Bronco a more uniform appearance and is especially useful after repainting or replacing fenders.

Features
  • Fits compatible 1987–1991 Ford Bronco XLT models
  • Complete 4-piece exterior emblem set
  • Covers both LH / driver side and RH / passenger side
  • Chrome-finish appearance
  • Factory-style Bronco XLT exterior look
  • Ideal for restoration and appearance refresh
  • Replaces missing, faded, scratched, or damaged side badges
  • Designed for fender / side-body installation
  • Suitable for stock restorations and clean custom builds
  • Helps restore balanced badging on both sides of the vehicle
In the box
  • 1 × LH / driver-side Bronco emblem
  • 1 × LH / driver-side XLT badge
  • 1 × RH / passenger-side Bronco emblem
  • 1 × RH / passenger-side XLT badge

Shipping weight 2.00 lb

004Application register

Everything this fits

1 application · 0 verified

SHEET
004
SUBJECT
FITMENT
SCALE
1:1
REV
A
Ford1
  • 1987–1991Bronco
    All engines

Intended for compatible 1987–1991 Ford Bronco XLT applications. Confirm the vehicle originally used the same Bronco and XLT fender-side badge configuration. Verify whether the emblems mount with adhesive, studs, clips, or a combination before installation. Some replacement badges may require reuse of original retainers or new mounting hardware. Compare emblem dimensions, stud spacing, and mounting-hole locations with the original badges. Do not assume compatibility with non-XLT Bronco trims unless the same badge layout is desired. Body repairs, replacement fenders, filled emblem holes, or custom paintwork may affect installation. If adhesive-backed, the body surface should be clean, dry, wax-free, and properly prepared. If stud-mounted, confirm that existing fender holes align before forcing the emblem into place. Test-position all four pieces before permanent installation to maintain correct height and spacing.

005Counter questions

Asked about this part

What is this product?
It is a 4-piece chrome fender-side emblem and badge set for compatible 1987–1991 Ford Bronco XLT models.
How many pieces are included?
The set includes 4 pieces total.
What comes in the 4-piece set?
It typically includes two Bronco emblems and two XLT badges for both sides of the vehicle.
Does the set include both driver and passenger sides?
Yes. It covers both LH and RH applications.
Is this specifically for XLT trim?
Yes. The badge combination is intended to match Bronco XLT exterior styling.
Will it fit a non-XLT Bronco?
It may physically install on some non-XLT Broncos, but the badging would not be factory-correct for those trims.
Is this a genuine Ford OEM set?
Unless specifically identified as genuine Ford, it should be treated as an aftermarket or reproduction replacement set.
What finish do the emblems have?
They have a bright chrome-style finish.
Are both XLT badges included?
Yes, one for each side.
Can the emblems be painted black?
Yes, but that permanently changes the chrome appearance.
Can they be used for a custom build?
Yes. They can work on both stock restorations and customized Broncos.
Will these badges restore the factory XLT look?
Yes, when used on a compatible Bronco with the correct placement and mounting style.
Do body repairs affect emblem placement?
Yes. Repaired or replaced fenders may have different hole locations.
Can alignment differ from side to side?
Yes, especially if previous repairs were done, so both sides should be measured carefully.
Should the original emblem locations be measured before removal?
Yes. Recording the original placement helps with accurate reinstallation.
Can these emblems be installed after clear coat?
Yes, provided the paint is fully cured and the mounting surface is properly prepared.
Should the paint cure before installation?
Yes. Installing on uncured paint can damage the finish or weaken adhesion.
What is the estimated product weight?
Approximately 0.5–1.5 lb for the complete set.
What shipping weight should I use for the listing?
2 lb (0.9 kg) is a practical estimated packaged weight.
Why is the shipping weight higher than the badge weight?
Protective packaging and the shipping box add weight.
What should I verify before ordering?
Confirm 1987–1991 Ford Bronco fitment, XLT trim, LH and RH emblem locations, badge dimensions, stud spacing, mounting style, and required clips or adhesive before purchase.
007Same department

Also on this shelf

All Emblems & Trim