Skip to content
Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆
CLASSIC PARTSGARAGE0items in cart
Front Wheel Hub Bearing Assembly for Ford Bronco 2021 2022 2023, part number FB7539
CLASSIC PARTS GARAGE · SCHEMATIC
FB7539
FB7539Medallion Auto PartsFront

Front Wheel Hub Bearing Assembly for Ford Bronco 2021 2022 2023

Replacement front wheel hub bearing assembly for 2021–2023 Ford Bronco models. Designed for the front axle, this unit combines the wheel hub and bearing into one service assembly to support the wheel, maintain smooth rotation, and restore proper front-end operation.

In stock12 Months

Not concours correct

This assembly is correct for compatible 2021–2023 Bronco front-wheel service because Ford catalogs identify MB3Z-1104-E as a front hub and bearing assembly, with placement at the left-front or right-front positions on compatible Bronco.

$300.00
1
003Specification

What it is

SHEET
003
SUBJECT
FB7539
SCALE
1:1
REV
A

Front Wheel Hub Bearing Assembly for Ford Bronco 2021 2022 2023 Product Description Shop 2021–2023 Ford Bronco front wheel hub bearing assembly for front-end repair, suspension service, or replacement of a noisy wheel bearing. Replacing a used Bronco wheel hub that has looseness, vibration, humming, or rough rotation can help restore smoother driving. Order Ford Bronco front hub bearing assembly for compatible 2021, 2022, and 2023 models when dependable wheel support and proper rotation are needed. This complete hub-and-bearing design combines the wheel mounting hub with a sealed bearing assembly for easier service. It is suitable for compatible LH or RH front positions and commonly uses a 6-stud configuration. Key Features Fits compatible 2021–2023 Ford Bronco models Front wheel hub and bearing assembly Suitable for LH or RH front position Integrated hub-and-bearing design Sealed, pre-greased construction on many applications Common 6-stud Bronco configuration Helps reduce wheel-bearing noise and looseness Precision-machined mounting surfaces Designed for daily driving and off-road use Direct replacement style for compatible applications Product Specifications Specification Details Product Type Wheel Hub & Bearing Assembly Vehicle Ford Bronco Model Years 2021–2023 Position Front Side LH or RH Wheel Studs Commonly 6 Bearing Type Sealed Hub Bearing ABS Sensor Verify by Application Installation Bolt-On Assembly Use Repair / Wheel Bearing Replacement Why Replace the Hub Assembly? A worn front hub bearing can cause humming, growling, wheel play, vibration, or uneven rotation. Replacing the complete assembly restores the wheel-support structure and avoids rebuilding the bearing separately.

Features
  • Fits compatible 2021–2023 Ford Bronco applications
  • Front wheel hub and bearing assembly
  • Suitable for either LH or RH front position on compatible applications
  • Integrated hub-and-bearing design
  • Common Bronco aftermarket assemblies use 6 wheel studs
  • Pre-greased sealed bearing design on many aftermarket units
  • Designed for smooth wheel rotation
  • Helps correct humming, growling, looseness, or vibration caused by a worn hub bearing
  • Precision-machined mounting surfaces
  • Sealed construction helps resist dirt, moisture, and road contamination
  • Suitable for street, daily-driver, and off-road Bronco use when matched correctly
  • OEM Ford reference MB3Z-1104-E is listed as a front hub & bearing assembly for compatible non-Raptor Bronco applications.
In the box
  • 1 × Front wheel hub & bearing assembly
  • Pre-installed wheel studs where supplied

Shipping weight 15.00 lb

004Application register

Everything this fits

1 application · 0 verified

SHEET
004
SUBJECT
FITMENT
SCALE
1:1
REV
A
Ford1
  • 2021–presentBronco Sport
    All engines

Intended for compatible 2021–2023 Ford Bronco front applications. Verify whether your Bronco is a standard/non-Raptor model; OEM Ford MB3Z-1104-E is specifically listed for Bronco applications without Raptor. Do not assume Bronco Raptor uses the same hub assembly. Confirm the vehicle’s VIN, trim, axle configuration, wheel-stud count, and front hub part number before ordering. Some aftermarket assemblies include an ABS / speed sensor while others do not. Check whether the replacement is intended for both front sides or has side-specific fitment. Verify 6-lug wheel-stud configuration against the vehicle. Always inspect the axle spline, steering knuckle, brake rotor, and mounting surfaces during replacement. Ford service instructions specify replacing the hub nut after removal. Modified suspension, aftermarket knuckles, axle changes, or Bronco Raptor components can affect compatibility. Use VIN confirmation when possible because Ford catalogs specifically recommend VIN verification for accurate fitmen

005Counter questions

Asked about this part

What is this product?
It is a front wheel hub and bearing assembly for compatible 2021, 2022, and 2023 Ford Bronco models.
What does a wheel hub bearing assembly do?
It supports the wheel, allows smooth rotation, and helps maintain proper wheel alignment and stability.
Which model years does it fit?
It is intended for compatible 2021–2023 Ford Bronco applications.
Is this for the front axle?
Yes. It is designed for front-wheel hub service.
Can it fit either the left or right side?
Many compatible assemblies can be used on either LH or RH front positions, but exact fitment should be verified.
What does LH mean?
LH means left-hand, which is the driver side on U.S.-market vehicles.
What does RH mean?
RH means right-hand, which is the passenger side.
Is this an OEM Ford part?
Unless specifically identified as genuine Ford, it should be treated as an aftermarket replacement.
What OEM reference may be associated with this application?
Ford reference MB3Z-1104-E is commonly associated with compatible front hub and bearing applications.
Will it fit a Bronco Raptor?
Do not assume so. Bronco Raptor may use different hub, axle, or suspension components.
Should the steering knuckle surface be cleaned?
Yes. Rust and debris should be removed before installing the new hub.
Can corrosion make hub removal difficult?
Yes. Rust can seize the hub into the steering knuckle.
Should anti-seize be used?
Only where permitted by the manufacturer’s service procedure.
What is the estimated product weight?
Approximately 10–14 lb, depending on the manufacturer and sensor configuration.
What shipping weight should I use for the listing?
15 lb (6.8 kg) is a practical estimated packaged weight unless the supplier provides an exact figure.
What should I verify before ordering?
Confirm 2021–2023 Ford Bronco fitment, VIN, Raptor or non-Raptor configuration, front LH or RH position, 6-stud layout, ABS sensor setup, axle spline, and OE/reference part number before purchase.
007Same department

Also on this shelf

All Wheels & Hubcaps