Restore proper exhaust-gas recirculation and engine drivability with this Standard Ignition EGR valve for compatible Ford applications. Designed as a direct-fit replacement, it helps regulate the flow of exhaust gases back into the intake system to reduce combustion temperatures.
A Standard Ignition EGR valve is the correct type of replacement for compatible Ford applications because Standard designs its valves as application-specific, OE-style replacements rather than universal valves.
Standard Ignition Exhaust Gas Recirculation (EGR) Valve for Ford Product Description Shop Standard Ignition EGR valve for compatible Ford vehicles when the original emissions valve is sticking, leaking, or no longer controlling exhaust flow correctly. Replacing a used Ford EGR valve can help address rough idle, hesitation, stalling, pinging, or emissions-related drivability problems. Order Standard Ignition exhaust gas recirculation valve for Ford repair, maintenance, or emissions-system restoration. Designed as an application-specific OE-style replacement, this valve helps meter exhaust gases back into the intake system to reduce combustion temperatures and support proper emissions operation. Standard Ignition builds EGR valves for specific Ford engines and control systems, so the correct part number should be matched to your vehicle before ordering. Key Features Standard Ignition / Standard Motor Products replacement Designed for compatible Ford applications OE-style direct-fit construction Helps regulate exhaust gas recirculation Supports emissions-system performance Can help correct EGR-related drivability issues Application-specific calibration Durable high-temperature construction Suitable for repair and maintenance Gasket may be included depending on part number Available for multiple Ford engine families Product Specifications Specification Details Product Type Exhaust Gas Recirculation Valve Brand Standard Ignition Vehicle Make Ford System Emissions / Engine Management Function Controls Exhaust Gas Recirculation Operation Vacuum or Electronic, Application Dependent Position Engine / Intake-Exhaust Control Fitment Vehicle & Engine Specific Gasket Verify Supplier Package Application Replacement / Emissions Repair Why Replace a Failing EGR Valve? A sticking or leaking EGR valve can disturb airflow and combustion, leading to rough idle, hesitation, reduced drivability, or emissions faults. Replacing the failed valve with the correct application-specific unit helps restore more consistent exhaust-gas control and proper engine-management operation.
Shipping weight 3.00 lb
1 application · 0 verified
Ford uses multiple EGR valve designs, so fitment must be verified by exact Standard part number. Confirm the vehicle’s year, model, engine displacement, VIN/engine code, and emissions configuration. Some Ford EGR valves are mechanical/vacuum-operated, while others are electronically controlled. Mounting-hole count, hose connections, electrical terminals, and valve calibration can vary by application. Do not assume one Standard EGR valve fits all Ford F-150, F-250, F-350, Bronco, Mustang, van, or SUV applications. For example, Standard EGV280 is listed for a 1990 F-250, EGV263 for a 1994 F-150, and EGV708 for a 1996 F-250, showing that application-specific valve selection matters. Check whether the vehicle uses an EGR tube, vacuum hose, electronic connector, or separate control solenoid. Carbon buildup in the EGR passages should be inspected before installing the new valve. A faulty EGR control solenoid, vacuum leak, clogged passage, or sensor problem can mimic EGR valve failure. Match the original valve’s mounting flange, connector, hose arrangement, and OE cross-reference before ordering.
Upgrade or complete your classic GM truck exhaust with these Flowmaster 2.50-inch Pre-Bent Tailpipes for 1973–1987 Chevrolet and GMC C/K pickups. Made from 16-gauge aluminized steel with mandrel bends.
Upgrade the exhaust on your classic truck with the Hooker Manifold-Back Exhaust System for 1973–1974 GM C10 and compatible 2WD Chevrolet/GMC pickups. Built with 2.25-inch mandrel-bent aluminized steel tubing.
Replace a cracked, leaking, or damaged passenger-side manifold with this Right Exhaust Manifold for 1967–1972 Chevrolet and GMC trucks, including compatible C10, C20, K10, C15/C1500, and C25/C2500 applications.
Restore exhaust flow and seal performance with this left and right exhaust manifold kit for compatible Ford F-250, F-350, Bronco, and related V8 applications. Designed as a matched driver- and passenger-side replacement set, it helps correct cracked manifolds, exhaust leaks, ticking noises.