Skip to content
Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆Free freight on orders over $199 · Every part matched to your VIN before it ships◆
CLASSIC PARTSGARAGE0items in cart
1967-1969 Ford Mustang Exhaust Tip, w/Rolled Tips Chrome, part number FM5554
CLASSIC PARTS GARAGE · SCHEMATIC
FM5554
FM5554Golden StarRear

1967-1969 Ford Mustang Exhaust Tip, w/Rolled Tips Chrome

Chrome rolled-edge exhaust tip for compatible 1967–1969 Ford Mustang applications. Designed to finish the visible tailpipe end with a cleaner factory-inspired appearance while replacing a rusted, dented, discolored, or missing original-style tip.

In stock12 Months

Not concours correct

This tip is appropriate for compatible 1967–1969 Mustang restoration because it combines the classic chrome appearance with a rolled outlet edge, giving the exposed tailpipe a clean, finished look that suits period-style rear exhaust.

$40.00
1
003Specification

What it is

SHEET
003
SUBJECT
FM5554
SCALE
1:1
REV
A

1967–1969 Ford Mustang Chrome Exhaust Tip with Rolled Tip Product Description Shop 1967–1969 Ford Mustang chrome exhaust tip for restoration, replacement, or finishing a classic exhaust system. Replacing a used Mustang exhaust tip can improve the rear appearance when the original is rusted, dented, discolored, or missing. Order Ford Mustang rolled-tip chrome exhaust trim for a cleaner factory-inspired finish. Designed for compatible 1967–1969 Ford Mustang applications, this exhaust tip features a polished chrome appearance with a rolled outlet edge. It is a practical finishing piece for restored exhaust systems, street-driven classics, and period-style Mustang builds. Key Features Fits compatible 1967–1969 Ford Mustang applications Chrome exterior finish Rolled outlet-edge design Helps restore a clean classic rear appearance Suitable replacement for damaged or missing exhaust trim Works well with restoration and street-performance exhaust systems Helps finish exposed tailpipe ends Suitable for factory-style and period-correct appearance goals Product Specifications Specification Details Product Type Exhaust Tip Vehicle Ford Mustang Model Years 1967–1969 Location Rear Exhaust / Tailpipe Finish Chrome Outlet Style Rolled Tip Material Verify Inlet Diameter Verify Outlet Diameter Verify Overall Length Verify Attachment Method Verify Quantity Verify Why Replace the Exhaust Tip? Original exhaust tips can become pitted, corroded, scratched, or damaged after years of heat and road exposure. A fresh chrome rolled-edge tip improves the visible tailpipe finish and helps complete a restored Mustang rear appearance without replacing the entire exhaust system.

Features
  • Fits compatible 1967–1969 Ford Mustang applications
  • Chrome exterior finish
  • Rolled outlet-edge design
  • Helps restore a classic Mustang rear appearance
  • Suitable replacement for damaged or missing exhaust tips
  • Finishes exposed tailpipe ends cleanly
  • Useful for restoration and street-driven builds
  • Suitable for factory-style and period-inspired exhaust systems
  • Helps improve appearance without replacing the entire exhaust
  • Polished finish complements chrome exterior trim
In the box
  • 1 × Chrome rolled-edge exhaust tip
  • Mounting clamp or hardware where supplied
  • Installation instructions where supplied

Shipping weight 4.00 lb

004Application register

Everything this fits

2 applications · 0 verified

SHEET
004
SUBJECT
FITMENT
SCALE
1:1
REV
A
Ford2
  • 1969–1973Mustang
    All engines
  • 1967–1968Mustang
    All engines

Intended for compatible 1967–1969 Ford Mustang applications. Confirm exact tailpipe diameter before ordering. Verify exhaust-tip inlet diameter. Check overall tip length and outlet diameter. Confirm whether the vehicle uses single or dual exhaust. Verify required quantity before purchase. Check rear valance style and exhaust cutout location. Modified or aftermarket exhaust systems may use different pipe diameters. Custom tailpipes may require adaptation. Verify whether the tip is clamp-on, slip-fit, bolt-on, or weld-on. Ensure adequate clearance from the rear valance and bodywork. Exhaust components become extremely hot during operation. Check alignment before final tightening or welding. Confirm chrome finish and material match the desired restoration standard.

005Counter questions

Asked about this part

What is this product?
It is a chrome rolled-edge exhaust tip for compatible 1967–1969 Ford Mustang applications.
What years does it fit?
It is intended for compatible 1967, 1968, and 1969 Ford Mustang exhaust systems.
Where does it install?
It installs at the rear tailpipe outlet.
Is this a complete exhaust system?
No. It is an exhaust tip only unless additional components are specifically stated.
What does “rolled tip” mean?
The outlet edge is formed with a rounded rolled lip instead of a simple straight-cut edge.
Is it polished?
It is intended to have a polished chrome appearance.
Is it stainless steel?
Verify the exact material before ordering.
Is it suitable for a show car?
Yes, if the finish and dimensions match the desired restoration standard.
Will it improve horsepower?
An exhaust tip by itself generally does not provide a meaningful horsepower increase.
Will it change exhaust sound?
It may slightly alter the tone depending on diameter and length, but major sound changes come from the mufflers, pipes, headers, and overall exhaust design.
Is it mainly a cosmetic part?
Yes, its primary role is to finish the visible tailpipe end.
Can it protect the raw tailpipe end?
It can help cover and finish the exposed pipe end.
How should I measure the tailpipe?
Measure the outside diameter of the pipe where the tip will attach.
Can a tip with the wrong inlet diameter be installed?
Not correctly without adapters or fabrication.
Can excessive black soot indicate an engine issue?
It can indicate a rich-running condition or other combustion problem.
Can blue oily residue indicate an engine problem?
Yes, it can be associated with oil consumption.
Can anti-seize be used on exhaust hardware?
Yes where appropriate and according to installation requirements.
Is this exhaust tip side-specific?
Usually not, but verify the design.
Can the same tip be used on either side of a dual exhaust?
Usually yes if the dimensions and orientation are identical.
Does body style matter?
It can, especially if rear valance or exhaust routing differs.
Can it fit a coupe?
Potentially, if the exhaust configuration matches.
What should I inspect?
Check for dents, scratches, plating damage, out-of-round openings, damaged rolled edges, and bent mounting areas.
Should a tip with peeling chrome be installed?
No if appearance and corrosion resistance matter.
Should the inlet be round?
Yes unless specifically designed otherwise.
What should I verify before ordering?
Confirm the 1967–1969 Ford Mustang model year, single or dual exhaust configuration, tailpipe outside diameter, tip inlet diameter, outlet diameter, overall length, attachment method, rear valance and bumper clearance, required quantity, and exact package contents before purchase.
007Same department

Also on this shelf

All Exhaust